Materials: T-shirt; textile paint; sponge brush; freezer paper; x-acto knife, cutting mat, and straight edge (helpful but not necessary)
As I mentioned in the last post, when the boys began talking about what they wanted to print on t-shirts, I thought perhaps scratch-foam printing–which prints in reverse, with a block of color surrounding the scratched image in white (see our examples here)–wasn’t the best way to go. I suggested perhaps we think about using stencils. They agreed. Come along and follow their design process!
First, they made sketches.
V has been reading lots of comics/graphic novels lately, and he wasn’t sure if he wanted the Captain America symbol or that of Green Lantern. N wanted to go with his custom “Super N—” symbol, an N in a circle. V eventually decided to start with Green Lantern as it’s simpler, with only one color, and N decided upon a yellow N in a red circle, which was still only one color because he’d chosen a yellow t-shirt.
Next we turned their sketches into larger, neater versions, still on regular paper.
After figuring out how large of a logo he wanted, V made his circles using a compass, then added in the lines at the top and bottom with a ruler. He compared it to the actual logo, consulted with his dad, and adjusted the lines a bit so they overlapped the circle more. Then we darkened it up, traced it onto the freezer paper, and I cut it out with the x-acto knife.
I helped N a bit more. We lay a sheet of paper over his shirt so he could show me how large the circle should be, and then I drew the finished circle with the compass. Together we sketched out the N, then neatened it up with the ruler. When all looked well, I traced his image and cut it out.
There are many tutorials online for using freezer paper stencils, and it’s very simple. The shiny side irons right onto the shirt. I slid a piece inside the shirt, too, so no paint would run through to the back. Then it’s time to paint.
Here’s N’s shirt, drying. You leave the stencils on until the paint is dry.
When the paint was dry, the boys and I peeled off the stencils together. So exciting!
V was pleased.
So was N.
We used Speedball Textile Screen Printing Ink, so I set the image with the iron as instructed. I laundered them inside out with no problems. They haven’t worn them yet because they both have art camp this week, and they don’t want to get any paint on their new shirts. Typically up until this point, when the kids have had something specific in mind (like, oh, a reversible fireman-spaceman knit winter hat), I’ve figured out the design and made it. How satisfying for them to go from their own sketch to finished product, with just minimal assistance.
What have your kids been designing recently?